Click image to view full size image
If you are planning to wholesale high quality lsaw from one of the leading lsaw manufacturers and factory, please feel free to contact us.
LSAW Transmission Pipe
LSAW pipe: Standard: API 5L, ISO3183 etc. Grades: API 5L (A, B, X42-X80) Outside Diameter: Φ406mm-Φ1626mm (16"-64") Wall thickness: 6.4mm-54mm (1/4"-21/8")Line Pipe can meet all requirements of high-pressure transmission pipeline for natural gas and petroleum and can be used in on-shore and off-shore oil and gas transmission.
Standard: API 5L, ISO3183 etc.
Grades: API 5L (A, B, X42-X80)
Outside Diameter: Φ406mm-Φ1626mm (16"-64")
Wall thickness: 6.4mm-54mm (1/4"-21/8")
Length: 3.0m-12.3m
End: square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy,? Fusion Bond Epoxy, 3-layers PE)
Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Uses: Line pipe can meet all requirements of high-pressure transmission pipeline for natural gas and petroleum and can be used in on-shore and off-shore oil and gas transmission
LSAW Structural Pipe
LSAW pipe:Standard: ASTM A139, ASTM A252, JIS G3444 etc. Grades: Q215-345, Grade A-E, Grade 1-3 STK290-540 Used as low pressure liquid delivery pipes,variety of structural parts by the force and pressure as well as other purposes
Structural pipes and Low pressure liquid delivery pipes
Standard: ASTM A139, ASTM A252, JIS G3444 etc.
Grades: Q215-345, Grade A-E, Grade 1-3 STK290-540
Outside Diameter: Φ406mm-Φ1626mm (16"-64")
Wall thickness: 6.4mm-54mm (1/4"-2⅛")
Length: 3.0m-12.3m
Uses: Used as low pressure liquid delivery pipes,variety of structural parts by the force and pressure as well as other purposes.
End: square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy,? Fusion Bond Epoxy, 3-layers PE)
Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
E-mail: 